xTool D1 Pro 20W 2.0 Laser Cutter and Engraver

In Stock
Powerful and fast laser cutter and engraver kit
  • Powerful 20W diode laser
  • Ultrafast speed up to 400 mm/s
  • Durable construction
  • Smart safety algorithms
When purchasing with us you get:
  • FREE Delivery
  • 1 Year Warranty
  • Local U.S. Support
  • FREE training
We Accept Purchase Orders From All Educational Institutions and Eligible Business Customers
This machine comes with:
  • Material pack
  • Safety goggles
  • Aluminum protective sheet
  • All necessary tools and spare parts
Price $1,199.99
The estimated lead time is 5-10 business days.

The xTool D1 Pro 20W 2.0 is one of the most powerful cutting / engraving diode laser machines in the market. This DIY kit featuring an aluminum robust open-frame construction and stainless steel rollers and linear rails is easily assembled thanks to the detailed instructions. The D1 Pro 20W is equipped with a laser module comprising four 5W diode lasers focused on the same spot, which provides the incredible output laser power of 20W. A 10-mm basswood or an 8-mm acrylic plate can be cut through in one pass.

Compared to the original version, the 2.0 model features the addition of an emergency stop switch to make the machine more safety compliant, with no other functional iterations. However, the manufacturer has introduced a few optional add-ons covering even more safety and usability aspects than before. For more information, check out the Add-ons section below.

The machine features a lightning-fast maximum speed of 400 mm/s yet providing high accuracy of up to 0.004 in. Four limit switches on both axes prevent the laser head from hitting the frame and allow setting the machine’s home position and working with absolute coordinates. To ensure safe operation, the D1 Pro 2.0 is equipped with a flame detector and a shake sensor. You can also buy an optional enclosure, dedicated smoke purifier, or special fire safety set for additional protection.

There are a lot of possible applications for the D1 Pro 2.0 limited only by your imagination.

a wood model cut on the xTool D1 Pro 20W laser machine

Credit: @kaydee_krafts / Instagram

Credit: @scrapbookmemoriesstudioz / Instagram

The D1 Pro series also includes the of the model that differs slightly in terms of its performance characteristics. For better efficiency and higher cutting requirements, the manufacturer recommends using the 20W version; as for the 10W one, it fits those pursuing fineness and engraving precision. The basic differences between two versions are presented in the table below.

  D1 Pro 20W D1 Pro 10W
Engraving accuracy 0.08 x 0.10 mm 0.08 x 0.06 mm
Cutting ability One-cut 10 mm basswood One-cut 6 mm basswood
Routing speed 400 mm/s 400 mm/s
Working area 430 x 390 mm 430 x 400 mm

 

Compatible materials

The xTool D1 Pro 2.0 can work with a wide range of materials. The machine can be used to cut most kinds of wood, including plywood and composite, paper and cardboard, cork, acrylic, leather, and others. All these materials can be engraved as well. Besides, the D1 Pro 2.0 can engrave coated metals, stainless steel, plastic, marble, stone, ceramic tiles, glass, and more. You can find the optimal material settings on the manufacturer’s website.

a compatible materials on the xTool D1 Pro 20W laser machine

a wood model cut on the xTool D1 Pro 20W laser machine

a wood model cut on the xTool D1 Pro 20W laser machine

The D1 Pro 20W 2.0 has a capability of color engraving on metals like stainless steel due to oxidizing of the metal surface by a powerful laser beam. The particular color depends on the engraving settings.

a model cut on the xTool D1 Pro 20W laser machine

 

Working area

The working area of 430 x 390 mm allows you to implement large-scale design projects or to engrave multiple smaller patterns at a time which can be extremely helpful for small businesses.

a working area on the xTool D1 Pro 20W laser machine

The maximum workpiece height of 50 mm can be increased with the use of optional risers. Each riser set adds 45 mm to the maximum height.

a workpiece height on the xTool D1 Pro 20W laser machine

 

Machine controls

a machine controls on the xTool D1 Pro 20W laser machine

On the right side of the machine frame there is a power and a USB port and a power switch. On top of the front panel you will find a start / stop button and a light status indicator.

a power switch on the xTool D1 Pro 20W laser machine

The machine is equipped with an easy and convenient focus adjustment mechanism using the lever on the laser module. Besides, you can further lower the laser head when cutting thick materials to achieve the optimal focal length and the maximum cutting capacity of the laser.

The machine can be connected to the PC using Wi-Fi or USB. It is also equipped with a TF card slot.

 

Software

The xTool D1 Pro 2.0 comes with the proprietary xTool Creative Space software. This free software is user-friendly, functional, and allows for firmware updates. xTool Creative Space is compatible with Windows, macOS, and iPadOS.

a software on the xTool D1 Pro 20W laser machine

Those looking for enhanced functionality can use the third-party LightBurn engraving software which is more powerful and supports more file formats, such as AI, SVG, DXF, PDF, HPGL, and PLT for vector files and PNG, JPEG, BMP, TIFF, TGA, and GIF for raster images. LightBurn is a paid software but it offers a free trial period. It is compatible with Windows, macOS, and Linux.

a LightBurn engraving software on the xTool D1 Pro 20W laser machine

Credit: lightburnsoftware.com

 

Applications

The xTool D1 Pro 2.0 is a perfect choice both for hobbyists and small to medium laser engraving businesses. Equipped with a powerful 20W laser, the machine is incredibly efficient and allows for tons of various applications, be it a home-made personalized gift for a friend or batch production in a craft workshop.

Credit: @mjmcreations7 / Instagram

The machine can be used to make customized home decorations, like wall hangings or photo frames, accessories, like wallets, bags, belts, or phone cases, jewelry, kitchenware, toys and puzzles, and much more.

 

What’s in the box


  • xTool D1 Pro 20W 2.0 assembly parts
  • Material pack
  • Aluminum protective sheet
  • Parts storage box
  • Tools and screws
  • TF card
  • All necessary cables
  • Safety goggles
  • User manual

For some items, package content may change. In case of any questions, please get in touch.

 

Add-ons

You can extend the capabilities of the xTool D1 Pro 2.0 and increase safety and convenience of use by purchasing various add-ons.

Air Assist Set

The Air Assist Set is connected to the laser head and blows away smoke and dust, protecting the laser lens. An output power of 30 L/min efficiently reduces the temperature on the material surface, preventing discoloration and ensuring a clean result with smooth cut edges.

  • Compatible with: xTool D1 5W / 10W, xTool D1 Pro 2.0
  • Power supply voltage: 110 / 220V
  • Air flow: 25–30 L/min
  • Air pressure: 30 kPa
  • Power: 17 W
  • Dimensions: 120.2 x 127.8 x 61.5 mm
  • Weight: 1200 g

Smoke Purifier

The xTool Smoke Purifier is compatible with the D1 Pro 2.0 equipped with an optional enclosure. The device is connected to the machine and features a large, 250 x 195 x 390 mm, filter with three-stage filtration including activated carbon and HEPA filters. It efficiently absorbs dust particles, toxic fumes, and unpleasant odors, allows adjusting the suction power, and works very quietly, with the noise level not exceeding 55 dB.

xTool Fire Safety Set

As the world’s first fully automated fire safety system for desktop laser cutters, this add-on boasts such capabilities as auto flame detection, alarm triggering, power cut, and fire extinguishing. All these features effectively minimize the possibility of fire accidents caused by the laser of the machine.

By using 5 fire detection sensors and integrated algorithms of light, temperature, and position inside an enclosed laser cutter, the xTool Fire Safety system is sensitive to any possible dangers. Immediately after detecting fire, it will automatically trigger the alarm, shut down the working laser in a few seconds, and automatically release the CO2 gas into the enclosed space to quench the fire with non-toxic and odorless fumes, thus preventing the machine from further damage.

Please note that this product must be used in an enclosed space. Namely, for the xTool D1 series, the system needs to be used with the xTool Enclosure.

  • Compatible with xTool D1 series, M1, P2, and Laserbox
  • Compatible with all 455nm blue diode laser or CO2 laser machines that are in a 0.13 m³ enclosed space

Includes:

  • Control box 
  • Sensor hub
  • Sensor 1
  • Sensor 2 x4
  • CO2 gas bottle x4
  • Power adapter and cable
  • Smart switch
  • Cable clamp
  • Tube + tube clamp
  • Cable tie pack
  • 3M tape

1064nm Infrared Laser Module

For even more creative opportunities with quality in mind, xTool offers the additional Infrared Laser Module, which allows one to finely engrave plastic and all metal materials. Apart from customizing jewelry pieces, the module provides clearer and finer results on plastic and acrylic surfaces without any burn marks and smudging effect.

  • Machine power: 120W
  • Laser electric power: 84W
  • Laser optical power: 2W
  • Laser spot: 0.03 x 0.03 mm
  • Wavelength: 1064nm
  • Peak power: 15KW

Honeycomb Working Panel Set

The Honeycomb Panel Set consists of an aluminum plate and a honeycomb working panel, both having dimensions of 50 x 50 cm. They are used for placing the materials to be processed and protect the working surface under the machine. The honeycomb structure speeds up smoke exhaustion and prevents the material from turning yellow.

Includes:

  • 1 x honeycomb working panel 19.68 x 19.68 x 0.87 in (50 x 50 x 2.2 cm)
  • 1 x aluminum panel 19.68 x 19.68 x 0.039 in (50 x 50 x 0.1 cm)

Extension Kit

The Extension Kit for the D1 Pro 2.0 increases the machine working area to the impressive 936 x 432 mm, which allows for much more efficient production.

Enclosure

As the D1 Pro 2.0 features an open-frame design, a foldable protective enclosure is indispensable for those who want to use the machine indoors safely and comfortably. The enclosure has three-layer walls, with the inner layer made of flame-retardant polyester and the middle layer being high-hardness honeycomb board material. The PU outer layer can be easily wiped and cleaned. With the enclosure, the user gets efficient ventilation and protection from dust particles, odors, and noise.

  • Dimensions: 625 x 610 x 310 mm (24.6 x 24 x 12.2 in)
  • Weight: 3.4 kg
  • Viewing window size: 455 x 250 mm(17.9 x 9.8 in)
  • Material: 4-mm honeycomb board material combined with 600D flame retardant polyester fabric
  • Viewing window material: blue light filtering PC

RA2 Pro rotary attachment

The RA2 Pro 4-in-1 rotary attachment allows engraving not only on flat objects, but also on spheres, rings, and cylinders and includes roller, chuck, sphere and ring rotary.

With additional risers, you can engrave on objects with a diameter of 3–198 mm. The use of the rotary attachment greatly expands the scope of application for the D1 Pro 2.0 laser engraver, providing even more room for creativity.

  • Dimensions: 321 x 138 x 105 mm
  • Compatible with: xTool D1, D1 Pro, and other open laser engravers
  • Gear ratio: Chuck 4:1
  • Chuck diameter: 50 mm
  • Engrave diameter range (with additional risers): Roller: 3–198 mm; Chuck: 0–100 mm; Sphere: 25–100 mm; Ring: 11–70 mm
  • Software: Laserbox basic / LightBurn / LightGRBL

xTool Risers

It is also possible to purchase a set of risers separately. Used with the xTool D1 Pro 2.0, they facilitate the engraving of higher objects by increasing the height of the machine. The risers set contain 4 packs, which are used on the four corners of the D1 Pro. Each set can increase the engraving height by 45 mm and supports stacking use.

When engraving flat materials without the rotary attachment:

Additional risers Max. working height Applications
0 50 mm Kraft paper, cardboard, jade
1 95 mm Metal coffee cup, leather bag
2 140 mm Storage box, wooden pencil cup
3 185 mm Skateboard
4 230 mm Ceramic vase

When engraving cylindrical materials with the rotary attachment:

Additional risers Cylinder diameter range
  Mode 1 Mode 2 Mode 3
0 3–15 mm / /
1 10–55 mm 40–65 mm 60–75 mm
2 55–100 mm 65–105 mm 75–105 mm
3 100–145 mm 105–150 mm 110–155 mm
4 145–190 mm 150–195 mm 150–198 mm

Material Package

The Laser Material Explore Kit includes 111 pieces of 17 material types and provides everything you need for your creative projects.

 

Look and feel

The xTool D1 Pro 2.0 desktop laser cutter and engraver is available in a golden red or metal gray color scheme. Its stylish design makes it ideal for any studio or workshop as well as home applications.

The machine dimensions are 23.6 x 23.2 x 5.9 in (600 x 590 x 150 mm). It weighs approximately 11 lb (5.5 kg).

 

Price

The price for the xTool D1 Pro 20W 2.0 laser cutter and engraver is $1,199.99, which is reasonable considering its high speed and ample capabilities.

Our mission
Founded in 2013, we have integrated digital manufacturing in over 10,000 businesses. Today we are a team of 80+ 3D printing enthusiasts, geeks and entrepreneurs on a mission to make these technologies accessible to all.
Trusted integrator
In 2018, 3D Print Awards named us the best digital manufacturing integrator. We offer technology and operational consulting to capture growth and achieve excellence in strategy, manufacturing and distribution.
Expert customer service
Deep expertise in 3D printing, 3D scanning, 3D modelling, plastic casting, laser cutting and CNC milling. It comes from delivering 5,000+ projects at our digital manufacturing bureau. We know what we talk about.
Fast response time
93% of surveyed customers are satisfied with our customer service. Have a question, concern or feedback for us? Our support team is a quick chat or email away — 5 days a week, Monday to Friday from 8 am to 4 pm PST.
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×

Please, wait ...